Stainless steel sprockets need to be regularly cleaned
Release Time:
Oct 26,2024
Stainless steel sprockets are mainly used in bicycles, motorcycles, and some transmission equipment in our daily lives.
Stainless steel sprockets need to be regularly cleaned to maintain their functionality. If the functionality of stainless steel sprockets cannot be maintained, it may lead to wear or maintenance, which is beneficial for us. Stainless steel sprockets are mainly used in bicycles, motorcycles, and some transmission equipment in our daily lives. Every time we use a bicycle on rainy or humid days, we should pay attention to cleaning the stainless steel sprockets and chains. The chains we use are usually stainless steel sprockets, which are not afraid of snow and water infiltration under normal circumstances. However, snow and water are mixed with dust and impurities, especially mud, which often assists in the wear of stainless steel sprockets. Over time, it can lead to broken teeth or loose teeth. When we stop cleaning stainless steel sprockets or chains, we should use clean cloth instead of damp cloth. Local cloth should be used to wipe the inside. As we also need to cooperate with the brush to stop the overall cleaning, the brush can stop cleaning some central parts that have not been cleared, so as to maintain the cleanliness of the stainless steel sprockets as a whole.
1. The tooth profile of the sprocket
The tooth profile of the sprocket must ensure that the chain enters and exits meshing smoothly and smoothly, minimizing the impact and contact stress of the chain links during meshing, and being easy to process.
Commonly used sprocket end face tooth profile. It is composed of three arcs and one straight line, abbreviated as three arcs straight line tooth profile. The tooth profile should be processed using standard cutting tools. There is no need to draw the end face tooth profile on the sprocket working diagram. It is only necessary to indicate on the diagram that the tooth profile is manufactured according to the 3RGB1244-85 rule. However, the shaft tooth profile of the sprocket should be drawn, and its dimensions should refer to the relevant design manual
2. Chain wheel structure
Small diameter sprockets are usually made as a whole, while medium diameter sprockets are often made as spoke plates. To facilitate handling, clamping, and weight reduction, holes are made in the spoke plates. Large diameter sprockets can be made as a combination, and the ring gear and wheel core can be manufactured with different materials!
3. Chain wheel information
The sprocket data should ensure that the gear teeth have sufficient strength and wear resistance, so the sprocket tooth surface is usually subjected to heat treatment to achieve a certain hardness.
Key words:
Previous:
What Else Might You Learn?
MESSAGES
We will contact you within one working day. Please pay attention to your email.
Qucik Link
Contact Us
Phone: +86-15832759852，+86-13582678512
E-mail: lijiuchuandong@163.com
Address: Renqiu City, Cangzhou City, Hebei Pprovince, China
